How do I read my export meter?

The instructions below explain how to read the export register on the smart meters ScottishPower installs. Please note we don’t accept estimated readings and can only issue payments using actual readings.

If your meter was installed by a different supplier, we recommend contacting them for guidance on how to take an export reading. If you get your electricity supply from a different supplier, and your meter isn’t working or your reading isn’t displaying, you’ll need to contact them to get it fixed.

Where can I find my export reading?

Your export reading comes from your electricity meter (the same one for the electricity you import), not your inverter, your app, or your generation meter. You’re looking for a screen with "export" in the name. Depending on your meter, it’ll show as Cum. Exp., Total Export kWh, Total Active Export kWh or EXPRT. That number, in kWh, is your cumulative export reading.

How do I send my export readings?

We should be able to take a reading from your export meter automatically every day through your smart or AMR meter.

If we can’t get a reading automatically, we’ll email you to ask for one. You’ll need to submit your meter reading online, and in some cases, we might require photo evidence that clearly shows the meter serial number and the meter reading on your export register. Please make sure you submit your cumulative or total export reading.

We can only pay you for periods we have readings for, so if we ask and don’t hear back, that period won’t be paid until we receive the reading.

We may also ask for a reading when you change or extend your system, when your SEG account closes, or if you switch to us from another supplier.

How do I take a reading from my export meter?

Find your meter below and then follow the instructions to get the export reading. The manufacturer is usually printed on the front.

Alcara

  1. Press A repeatedly until you reach Total Active Export kWh. That’s your reading.

  2. If you don’t see it, press B to cycle through the headings until Mode of Operation appears, then press A repeatedly until you reach Total Export kWh.

  3. If you end up somewhere unexpected, wait 60 seconds — the display returns to the main menu on its own.

Elster

  1. Press the middle button to open the menu.

  2. Use the top and bottom buttons to get to General, then press the middle button.

  3. Get to Total Registers the same way, and press the middle button.

  4. Cycle through with the top and bottom buttons until you see Cum. Exp. That’s your reading, in kWh.

Honeywell

  1. Press the top button to open the main menu.

  2. Use the bottom button to get to Registers, then press the top button.

  3. Use the bottom button to get to Cumulative, then press the top button.

  4. Press the bottom button until Cum. Exp. appears. That’s your reading, in kWh.

EDMI

  1. Press OK to move forward through the screens, or the return button to go back, until you reach EXPRT. That’s your reading, in kWh.

  2. You can also just wait — the display cycles through IMPRT, EXPRT and BILL every few seconds.

Kaifa

  1. Press either of the buttons to light up the display. Use either button to see the menu and cycle through the options until you see ‘General Display”.

  2. Hold down the same button to choose “General Display”, and then press the button again until you see “Basic Data”. Hold down the button again to choose this option.

  3. Cycle through the screens until you see “-A value” with ‘kWh’ and 5 numbers. This is your export reading, measured in kilowatt hours.

My meter isn’t listed

We’ve listed the meters we install. If another supplier installed yours, the steps will be different — they’ll be able to talk you through it.

You can also call us on 0800 001 5156, Monday to Friday, 8am–4.45pm (local rate charge applies).

Last updated: 12 November 2026


Was this information helpful?